View NGP15N41ACL_9011049.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 publication order number: ngd15n41acl/d ngd15n41acl, ngb15n41acl, NGP15N41ACL ignition igbt 15 a, 410 v n?channel dpak, d 2 p ak and to ?220 this logic level insulated gate bipolar t ransistor (igbt) features monolithic circuitry integrating esd and over ? voltage clamped protection for use in inductive coil drivers applications. primary uses include ignition, direct fuel injection, or wherever high voltage and high current switching is required. features ? ideal for coil? on? plug applications ? dp ak package offers smaller footprint and increased board space ? gate? emitter esd protection ? t emperature compensated gate ? collector voltage clamp limits stress applied to load ? integrated esd diode protection ? new design increases unclamped inductive switching (uis) ener gy per area ? low threshold v oltage to interface power loads to logic or microprocessor devices ? low saturation v oltage ? high pulsed current capability ? optional gate resistor (r g ) and gate? emitter resistor (r ge ) ? these are pb ? free devices maximum ra tings (t j = 25 c unless otherwise noted) rating symbol v alue unit collector? emitter v oltage v ces 440 v dc collector ? gate v oltage v cer 440 v dc gate? emitter v oltage v ge 15 v dc collector current? continuous @ t c = 25 c ? pulsed i c 15 50 a dc a ac esd (human body model) r = 1500 , c = 100 pf esd 8.0 kv esd (machine model) r = 0 , c = 200 pf esd 800 v t otal power dissipation @ t c = 25 c derate above 25 c p d 107 0.71 w atts w/ c operating and storage t emperature range t j , t stg ? 55 to +175 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 15 amps 410 vol ts v ce(on) 2.1 v @ i c = 10 a, v ge 4.5 v s ee detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. ordering information see general marking information in the device marking section on page 8 of this data sheet. device marking information to ?220ab case 221a style 9 1 2 3 4 1 2 3 4 d 2 pa k case 418b style 4 dpak case 369c style 2 littelfuse.com 1 2 3 4 c e g r g r ge specifications subject to change without notice. ? 2016 littelfuse, inc. december, 2016 ? rev. 9
ngd15n41acl, ngb15n41acl, NGP15N41ACL unclamped collector ?to ? emitter avalanche characteristics (? 55 t j 175 c) characteristic symbol value unit single pulse collector ? to? emitter avalanche energy v cc = 50 v, v ge = 5.0 v, pk i l = 16.6 a, l = 1.8 mh, starting t j = 25 c v cc = 50 v, v ge = 5.0 v, pk i l = 15 a, l = 1.8 mh, starting t j = 125 c e as 250 200 mj thermal characteristics characteristic symbol value unit the r mal resistance, junction to case r jc 1.4 c/w the r mal resistance, junction to ambient dpak (note 1) r ja 100 d 2 pak (note 1) r ja 50 to ?220 r ja 62.5 maximum lead temperature for soldering purposes, 1/8 from case for 5 seconds t l 275 c electrical characteristics characteristic symbol test conditions temperature min typ max unit off characteristics collector ? emitter clamp voltage bv ces i c = 2.0 ma t j = ? 40 c to 150 c 380 410 440 v dc i c = 10 ma t j = ? 40 c to 150 c 380 410 440 zero gate voltage collector current i ces v ce = 350 v, v ge = 0 v t j = 25 c ? 2.0 20 a dc t j = 150 c ? 10 40* t j = ? 40 c ? 1.0 10 reverse collector ? emitter leakage current i ecs v ce = ? 24 v t j = 25 c ? 0.7 2.0 ma t j = 150 c ? 12 25* t j = ? 40 c ? 0.1 1.0 reverse collector ? emitter clamp voltage b vces(r) i c = ? 75 ma t j = 25 c 27 33 37 v dc t j = 150 c 30 36 40 t j = ? 40 c 25 31 35 gate? emitter clamp voltage bv ges i g = 5.0 ma t j = ? 40 c to 150 c 11 13 15 v dc gate? emitter leakage current i ges v ge = 10 v t j = ? 40 c to 150 c 384 640 1000 a dc gate resistor r g ? t j = ? 40 c to 150 c ? 70 ? gate emitter resistor r ge ? t j = ? 40 c to 150 c 10 16 26 k on characteristics (note 2) gate threshold voltage v ge(th) i c = 1.0 ma, v ge = v ce t j = 25 c 1.1 1.4 1.9 v dc t j = 150 c 0.75 1.0 1.4 t j = ? 40 c 1.2 1.6 2.1* threshold temperature coefficient (negative) ? ? ? ? 3.4 ? mv/ c 1. when surface mounted to an fr4 board using the minimum recommended pad size. 2. pulse t est: pulse width 300 s, duty cycle 2%. *maximum value of characteristic across temperature range. 2 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. december, 2016 ? rev. 9
electrical characteristics (continued) characteristic symbol t est conditions t emperature min ty p max unit on characteristics (continued) (note 3) collector? to? emitter on ? v oltage v ce(on) i c = 6.0 a, v ge = 4.0 v t j = 25 c 1.0 1.6 1.8 v dc t j = 150 c 0.9 1.5 1.8 t j = ? 40 c 1.1 1.65 1.9* i c = 8.0 a, v ge = 4.0 v t j = 25 c 1.3 1.8 2.0* t j = 150 c 1.2 1.7 1.9 t j = ? 40 c 1.4 1.8 2.0* i c = 10 a, v ge = 4.0 v t j = 25 c 1.4 2.0 2.2 t j = 150 c 1.5 2.0 2.3* t j = ? 40 c 1.4 2.0 2.2 i c = 10 a, v ge = 4.5 v t j = 25 c 1.3 1.9 2.1 t j = 150 c 1.3 1.9 2.1 t j = ? 40 c 1.4 1.95 2.1* forward t ransconductance gfs v ce = 5.0 v , i c = 6.0 a t j = ? 40 c to 150 c 8.0 15 25 mhos dynamic characteristics input capacitance c iss v cc = 25 v , v ge = 0 v f = 1.0 mhz t j = ? 40 c to 150 c 400 650 1000 pf output capacitance c os s 30 55 100 t ransfer capacitance c rss 3.0 4.5 8.0 switching characteristics t urn? off delay time (inductive) t d(of f) v cc = 300 v , i c = 6.5 a r g = 1.0 k , l = 300 h t j = 25 c ? 4.0 10 sec t j = 150 c ? 4.5 10 fall t ime (inductive) t f v cc = 300 v , i c = 6.5 a r g = 1.0 k , l = 300 h t j = 25 c ? 6.0 12 t j = 150 c ? 10 12 t urn? off delay time (resistive) t d(of f) v cc = 300 v , i c = 6.5 a r g = 1.0 k , r l = 46 , t j = 25 c ? 3.0 10 sec t j = 150 c ? 3.5 10 fall t ime (resistive) t f v cc = 300 v , i c = 6.5 a r g = 1.0 k , r l = 46 , t j = 25 c ? 8.0 15 t j = 150 c ? 12 15 t urn? on delay time t d(on) v cc = 10 v , i c = 6.5 a r g = 1.0 k , r l = 1.5 t j = 25 c ? 0.7 4.0 sec t j = 150 c ? 0.7 4.0 rise t ime t r v cc = 10 v , i c = 6.5 a r g = 1.0 k , r l = 1.5 t j = 25 c ? 4.0 7.0 t j = 150 c ? 5.0 7.0 3. pulse test: pulse width 300 s, duty cycle 2%. *maximum value of characteristic across temperature range. 3 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. december, 2016 ? rev. 9 ngd15n41acl, ngb15n41acl, NGP15N41ACL
typical electrical characteristics (unless otherwise noted) gate t o emitter vol tage (volts) 0 40 6 10 4 2 i c, collector current (amps) 0 60 20 30 50 8 135 7 0 40 6 10 4 2 i c, collector current (amps) 0 v ce , collector t o emitter vol tage (volts) figure 1. output characteristics figure 2. output characteristics 0 25 20 15 10 21.5 1 5 30 0 0.5 2.5 3 3.5 figure 3. output characteristics v ge , gate t o emitter vol tage (volts) figure 4. transfer characteristics i c, collector current (amps) figure 5. collector ? to? emitter saturation voltage versus junction t emperature figure 6. collector ? to ? emitter voltage versus gate? to? emitter voltage 60 v ge = 10 v v ce , collector t o emitter vol tage (volts) 20 30 50 8 1357 5 v t j = 25 c t j = ? 40 c v ge = 10 v 5 v 4.5 v 4 v 3.5 v 3 v 2.5 v t j = 150 c 4 4.5 5 4.5 v 4 v 3.5 v 3 v 2.5 v 0 40 6 10 4 2 i c, collector current (amps) 0 60 20 30 50 8 135 7 v ce , collector t o emitter vol tage (volts) t j = 150 c v ge = 10 v 5 v 4.5 v 4 v 3.5 v 3 v 2.5 v 2.5 t j , junction temperature ( c) v ce , collector t o emitter vol tage (volts) ?50 50 75 25 0 100 ? 25 125 1.0 3.0 0.5 2.0 0.0 3.5 4.0 1.5 150 v ge = 5 v i c = 25 a i c = 20 a i c = 15 a i c = 10 a i c = 5 a 2.5 collector t o emitter voltage (volts) 36 7 58 49 1 0.5 2 0 3 1.5 10 i c = 15 a i c = 10 a i c = 5 a v ce = 10 v t j = 25 c t j = ? 40 c t j = 25 c 4 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. ngd15n41acl, ngb15n41acl, NGP15N41ACL december, 2016 ? rev. 9
tempera ture ( c) threshold vol tage (volts) ?50 50 70 10 ?10 90 ?30 130 150 mean + 4 mean ? 4 mean ga te to emitter voltage (volts) 1.2 0.2 0 2 0.6 1 1.6 10000 1000 100 10 0 6 4 0 8 10 12 figure 7. collector ? to? emitter v oltage versus gate? to? emitter voltage figure 8. capacitance variation figure 9. gate threshold voltage versus temperature figure 10. minimum open secondary latch current versus temperature tempera ture ( c) i l , la tch current (amps) figure 1 1. typical open secondary latch current versus temperature v ce , collect or to emitter voltage (volts) figure 12. inductive switching fall t ime versus temperature tempera ture ( c) c, cap acitance (pf) switching time ( s) 0 120 60 4020 140 180 ?50 50 75 250 100 ?25 125 10 20 5 15 0 25 30 t j = 150 c 175 v cc = 50 v v ge = 5 v r g = 1000 l = 6 mh 200 80 100 160 ?50 50 70 30 ?10 90 ?30 130 150 t f v cc = 300 v v ge = 5 v r g = 1000 i c = 10 a l = 300 h c rs s c iss c oss 2.5 36 7 58 49 1 0.5 2 0 3 1.5 10 i c = 15 a i c = 10 a i c = 5 a collect or to emitter voltage (volts) 1 30 1 10 0.4 0.8 1.4 1.8 150 l = 3 mh l = 2 mh tempera ture ( c) i l , la tch current (amps) ?50 50 75 250 100 ?25 125 10 20 5 15 0 25 30 175 v cc = 50 v v ge = 5 v r g = 1000 l = 6 mh 150 l = 3 mh l = 2 mh 2 10 1 10 t d(of f) 5 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. ngd15n41acl, ngb15n41acl, NGP15N41ACL december, 2016 ? rev. 9
0.2 0.00001 0.001 0.0001 0.1 10 1 0.01 0.01 t,time (s) r(t), transient thermal resistance ( c/w att) single pulse 11 0 0.1 0.05 0.02 0.01 100 1000 duty cycle = 0.5 0.1 figure 13. transient thermal resistance (non ? normalized junction ? to? ambient mounted on fixture in figure 14) p (pk) t 1 t 2 duty cycle, d = t 1 /t 2 d curves appl y for power pulse train shown read time a t t 1 t j(pk) ? t a = p (pk) r ja (t) r jc ? r(t) for t 0.2 s 4 1.5 4 4 0.125 figure 14. test fixture for t ransient thermal curve (48 square inches of 1/8 thick aluminum) 6 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. ngd15n41acl, ngb15n41acl, NGP15N41ACL december, 2016 ? rev. 9
100 10 0.1 1 0.01 figure 15. single pulse safe operating area (mounted on an infinite heatsink at t a = 25 c) collect or ? emitter voltage (volts) figure 16. single pulse safe operating area (mounted on an infinite heatsink at t a = 125 c) collect or ? emitter voltage (volts) collect or current (amps) collect or current (amps) 1 100 10 1000 100 10 0.1 1 0.01 1 100 10 1000 100 s 10 ms 1 ms 100 ms dc 100 s 10 ms 1 ms 100 ms dc 100 10 0.1 1 0.01 collect or ? emitter voltage (volts) collector ? emitter voltage (volts) collect or current (amps) collect or current (amps) 1 100 10 1000 100 10 0.1 1 0.01 1 100 10 1000 t 1 = 1 ms, d = 0.05 i (pk ) t 1 t 2 duty cycle, d = t 1 /t 2 i (pk ) t 1 t 2 duty cycle, d = t 1 /t 2 t 1 = 2 ms, d = 0.10 t 1 = 3 ms, d = 0.30 t 1 = 1 ms, d = 0.05 t 1 = 2 ms, d = 0.10 t 1 = 3 ms, d = 0.30 figure 17. pulse t rain safe operating area (mounted on an infinite heatsink at t c = 25 c) figure 18. pulse train safe operating area (mounted on an infinite heatsink at t c = 125 c) 7 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. ngd15n41acl, ngb15n41acl, NGP15N41ACL december, 2016 ? rev. 9
ordering informa tion device package type shipping dpak (pb ? free) 2500/tape & reel ngd15n41aclt4g d 2 pak (pb? free) 800/tape & reel ngb15n41acl t4g to ?220 (pb?free) 50 units/rail NGP15N41ACLg marking diagrams a = assembly location y = year ww = work week g = pb ? free device ngp 15n41clg ayww 1 gate 3 emitter 4 collector ngb 15n41clg ayww 1 gate 3 emitter 4 collector 2 collector 2 collector to ? 220ab case 221a style 9 d 2 pak case 418b style 4 dp ak case 369c style 7 1 gate 4 collector 2 collector 3 emitter yww gd 15n41g 8 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. december, 2016 ? rev. 9 ngd15n41acl, ngb15n41acl, NGP15N41ACL
p ackage dimensions dp ak (single gauge) case 369c ? 01 issue d style 2: pin 1. gate 2. drain 3. source 4. drain b d e b3 l3 l4 b2 e m 0.005 (0.13) c c2 a c c z dim min max min max millimeters inches d 0.235 0.245 5.97 6.22 e 0.250 0.265 6.35 6.73 a 0.086 0.094 2.18 2.38 b 0.025 0.035 0.63 0.89 c2 0.018 0.024 0.46 0.61 b2 0.030 0.045 0.76 1.14 c 0.018 0.024 0.46 0.61 e 0.090 bsc 2.29 bsc b3 0.180 0.215 4.57 5.46 l4 ??? 0.040 ??? 1.01 l 0.055 0.070 1.40 1.78 l3 0.035 0.050 0.89 1.27 z 0.155 ??? 3.93 ??? notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: inches. 3. thermal pad contour optional within di- mensions b3, l3 and z. 4. dimensions d and e do not include mold flash, protrusions, or burrs. mold flash, protrusions, or gate burrs shall not exceed 0.006 inches per side. 5. dimensions d and e are determined at the outermost extremes of the plastic body. 6. datums a and b are determined at datum plane h. 12 3 4 5.80 0.228 2.58 0.102 1.60 0.063 6.20 0.244 3.00 0.1 18 6.17 0.243 mm inches scale 3:1 soldering footprint h 0.370 0.410 9.40 10.41 a1 0.000 0.005 0.00 0.13 l1 0.108 ref 2.74 ref l2 0.020 bsc 0.51 bsc a1 h det ail a sea ting plane a b c l1 l h l2 gauge plane det ail a rot a ted 90 cw 9 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. december, 2016 ? rev. 9 ngd15n41acl, ngb15n41acl, NGP15N41ACL
p ackage dimensions style 4: pin 1. ga te 2. collector 3. emitter 4. collector d 2 pa k case 418b? 04 issue k sea ting plane s g d ?t? m 0.13 (0.005) t 23 1 4 3 pl k j h v e c a dim min max min max millimeters inches a 0.340 0.380 8.64 9.65 b 0.380 0.405 9.65 10.29 c 0.160 0.190 4.06 4.83 d 0.020 0.035 0.51 0.89 e 0.045 0.055 1.14 1.40 g 0.100 bsc 2.54 bsc h 0.080 0.110 2.03 2.79 j 0.018 0.025 0.46 0.64 k 0.090 0.110 2.29 2.79 s 0.575 0.625 14.60 15.88 v 0.045 0.055 1.14 1.40 ?b? m b w w notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 418b ?01 thru 418b ? 03 obsolete, new standard 418b ?04. f 0.310 0.350 7.87 8.89 l 0.052 0.072 1.32 1.83 m 0.280 0.320 7.11 8.13 n 0.197 ref 5.00 ref p 0.079 ref 2.00 ref r 0.039 ref 0.99 ref m l f m l f m l f v ariable configura tion zone r n p u view w? w view w ? w view w ? w 12 3 soldering footprint 8.38 5.080 dimensions: millimeters pitch 2x 16.155 1.016 2x 10.49 3.504 10 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. december, 2016 ? rev. 9 ngd15n41acl, ngb15n41acl, NGP15N41ACL
p ackage dimensions to ?220 case 221a? 09 issue af style 9: pin 1. gate 2. collector 3. emitter 4. collector notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. dimension z defines a zone where all body and lead irregularities are allowed. dim min max min max millimeters inches a 0.570 0.620 14.48 15.75 b 0.380 0.405 9.66 10.28 c 0.160 0.190 4.07 4.82 d 0.025 0.035 0.64 0.88 f 0.142 0.161 3.61 4.09 g 0.095 0.105 2.42 2.66 h 0.110 0.155 2.80 3.93 j 0.014 0.025 0.36 0.64 k 0.500 0.562 12.70 14.27 l 0.045 0.060 1.15 1.52 n 0.190 0.210 4.83 5.33 q 0.100 0.120 2.54 3.04 r 0.080 0.110 2.04 2.79 s 0.045 0.055 1.15 1.39 t 0.235 0.255 5.97 6.47 u 0.000 0.050 0.00 1.27 v 0.045 --- 1.15 --- z --- 0.080 --- 2.04 b q h z l v g n a k f 12 3 4 d sea ting plane ?t? c s t u r j littelfuse.com 11 publication order number: ngd15n41acl/d specifications subject to change without notice. ? 2016 littelfuse, inc. infor mation furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability of and test each pr oduct selected for their own applications.? littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in whic h the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those express ly set forth in applic able littelfuse product documentation.? warranties granted by littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable littelfuse documentation.? littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by littelfuse as set forth in applicable littelfuse documentation.? the sale and use of littelfuse products is subject to littelfuse terms and conditions of sale, unless otherwise agreed by littelfuse. december, 2016 ? rev. 9 ngd15n41acl, ngb15n41acl, NGP15N41ACL

▲Up To Search▲

Price & Availability of NGP15N41ACL

	To Download NGP15N41ACL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .